New! 12V CDI for the '69-'71 H1 |
|
|
This is a newly
manufactured 12V CDI unit, made to replace the 2-unit CDI set that
originally came in the '69-'71 Kawasaki H1. Internally, it is all
new, developed by us, and like all our products, it's manufactured in
our shop in North Carolina. The
electronic components were chosen for ruggedness and long life. The
housing
is cast aluminum with a neat, brushed finish and the mounting bracket
is made of brushed 304 stainless steel. It fits perfectly
in
the original location of the B unit. The circuit is sealed in high
quality
epoxy potting compound for protection from moisture and
vibration. The wires on
this unit are approximately 6 inches long to allow easy connection to
the wiring harness This CDI unit performs like the original units, including the advance curve. It fires precicely when the timing marks on the ignition rotor align with the mark on the pickup, as the original system did. We will repair or replace this unit, or refund the purchase price, at our option, if it fails to perform properly as a result of defects in materials or workmanship, within five years of the date of purchase. |
|